S
ETTING
UP
FROM
THE
P
RINTER
T
OUCH
P
ANEL
27
Configuration:
Prints the Configuration page, which gives the current server and device
configuration. This page lists general information about the hardware and software
configuration of the EX/i Print Server, the current Setup options, information about the
current calibration, and the IP address of the EX/i Print Server.
Job Log:
Prints a list of the last 55 jobs.
Color Charts:
Prints samples of the RGB, CMY, and PANTONE colors available from the
EX/i Print Server.
PS/PCL Font List:
Prints a list of all fonts currently on the EX/i Print Server hard disk.
E-mail Log:
Prints a list of recent e-mail activity that is useful to the network administrator.
FTP Log:
Prints a list of recent FTP activity that is useful to the network administrator.
N
OTE
:
To print the E-mail or FTP Log, you must first enable the appropriate service. For
E-mail Services, see Configure Help.
Scan tab
Allows the administrator to create, edit, and delete job templates for scanning. For more
information, see
Utilities
.
Tools tab
Tray Alignment:
Adjust the placement of text and images on a page so that they correctly align
on the sheet of paper and both sides of a duplex sheet have exactly the same alignment. For
more information, see
Utilities
.
Setup:
Sets up the EX/i Print Server.
Calibrate tab
For more information about calibrating from the printer touch panel, see
Color Printing
.
Setup options on the printer touch panel
When you perform EX/i Print Server Setup from the printer touch panel, you configure the
EX/i Print Server to receive jobs over the network systems that are used at your site, including
setting network addresses and names to be used by computers, servers, and the EX/i Print
Server when they communicate with each other.
Before performing Setup, confirm that the EX/i Print Server is connected to an active
network, because the EX/i Print Server queries the network for zones, servers, and server-
based queues. If you perform Network Setup without a connected and functioning network,
default settings are used that may not meet your needs.
