Xerox Docutech 6100, Planning Manual

Page: 14 / 16

Xerox Document Stacker 5000 (DS5000)
System Dependencies and Prerequisites
Listed below are the dependencies and prerequisites for
installing the DS5000 in-line with the Nuvera Digital Production
System.
•
The Finisher Transport Module is required for in-line
connectivity to the printer.
•
Currently, a Xerox Document Stacker 5000 must be installed
in-line with the printer if another in-line device is a part of the
solution.
Note: In case the floor at the customer site is very uneven, it is
recommended that the Nuvera IOT is installed and leveled with a
Caster Leveling Kit (kit number 498K07900).
Configuration Guide
The Configuration Guide contains diagrams over the various
Finishing Solutions that are available.
SFM IOT FTM
SFM SFM IOT
SFM IOT INS
SFM SFM IOT
FTM
FTM
INS FTM
DS5000
DS5000
DS5000
DB120D
FP II
SQFBM
DS5000
DS5000
DS5000
DS5000
DB120D
FP II
SQFBM
DS5000
DS5000
DS5000
DS5000
DS5000
DS5000
BDFX
DS5000
BDFX DS5000 DS5000
DS5000 SQEDG
BDFX BCFX SQEDG BDFX BCFX
BDFX SQEDG DS5000
DS5000 DS5000 BDFX DS5000 DS5000 BDFX BCFX
BDFX BCFX DS5000 DS5000 SQEDG
Printer Configurations Finisher Configurations
Productivity Guide
The DS5000 does not affect the base printers output speed.
3-2