Macintosh EtherTalk Network
Quick Network Install Guide
❖
33
Macintosh EtherTalk Network
Quick Install Steps
1
Print the Configuration Sheet. Details are in this
document in
Appendix A: Print The Configuration
Sheet
.
2
Check the Configuration Sheet and verify that EtherTalk
is enabled, the AppleTalk name is correct, the AppleTalk
zone is correct (if used), and the proper connector is
enabled. Details are in the
Technical Information Guide
.
3
Use the software installer to load print drivers. Details for
this are found in the your printer
CD-ROM
.
4
Select your printer and zone (if used) in the Chooser.
5
Send a print job to the printer.
6
Check the print job for print quality. If print quality
problems exist, use the print quality section of your
printer
System Administrator Guide
to correct the
problem.
7
If your print job did not print, see the Troubleshooting
section for your operating system in the
Technical
Information Guide
to correct the problem.