6/98
Offset Catch Tray (OCT) Option
9-8
Xerox DocuPrint N17 Service Manual
9.3 OCT REPS
9.3.1 OCT Unit
Removal
1 Press the two latches in the bottom part of the rear surface of the OCT Unit, and raise the unit
from behind.
2 Disengage the hook inserted in the Top Cover near the Fan at the left side for the base engine
from the Top Cover.
NOTE: Raise the OCT Unit about 3 cm by step 1 and then move it rearward about 3 cm; the hook comes
out of the Top Cover.
Figure 9.3.1.1 Removing the OCT Unit
Replacement
Perform the removal steps in reverse order.
SAS4A2FA
www.printcopy.info
www.printcopy.info
