manualshive.com logo in svg

Xerox DocuPrint CM205 b, User Manual, Page: 199 / 266

Share
Download
Xerox DocuPrint CM205 b User Manual Download Page 199

Troubleshooting

198

Random Spots/Blurred Images

NOTE: 

•

If the problem continues even though you have taken suggested actions described above, contact the Fuji 
Xerox local representative office or an authorised dealer.

Problem

Action

The printed result has random 
spots or is blurred.

Ensure that the toner cartridges are installed correctly. 

See also: 

• "Installing a Toner Cartridge" on page 244

If you use non-genuine brand toner cartridges, install genuine brand 
toner cartridges.
Clean up the fusing unit.

1

Load one sheet of paper on the MPF, and then print a solid image 
all over paper.

2

Load the printed sheet with the side to be printed on facing down, 
and then print a blank sheet of paper.

Summary of Contents for DocuPrint CM205 b











































































































































































































































































Reviews:

No comments