manualshive.com logo in svg

Xerox DocuPrint C3300 DX, User Manual

The Xerox DocuPrint C3300 DX is an exceptional printer designed to meet all your printing needs. With its high-quality output and advanced features, this product is ideal for both home and office use. Enhance your experience with our comprehensive user manual, available for free download at manualshive.com.

Share
Download
background image

168

7 Maintenance

7.13

Cleaning the Printer

This section explains how to clean the printer to keep it in good condition and to ensure 
optimum print quality.

WARNING

• When cleaning this product, use the designated cleaning materials exclusive to it. Other 

cleaning materials may result in poor performance of the product. Never use aerosol 
cleaners, or it may catch fire and cause explosion.

CAUTION

• When cleaning this product, always switch off and unplug it. Access to a live machine 

interior may cause electric shock.

Cleaning the Exterior

Clean the exterior of the printer monthly or more often if needed. To clean the exterior 
surfaces, wipe them with a soft, firmly wrung cloth moistened with water. Then, wipe off any 
excess water with a soft dry cloth. If dirt or smudges do not come off easily, gently wipe them 
off with a soft, firmly wrung cloth moistened with a small amount of neutral cleaner.

Important

• Do not spray cleaning agents directly on the printer. The fluid may seep through the cracks and cause 

problems. Do not use cleaning agents other than neutral cleaners.

Cleaning the Interior

After clearing paper jams or replacing print cartridges, inspect the inside of the printer 
before closing the printer covers.

Important

• Never touch a labeled area found on or near the heat roller. You can get burnt. If a sheet of paper is 

wrapped around the heat roller, do not try to remove it by yourself to avoid injuries or burns. Doing so 
can cause injuries or burns. Switch off the machine immediately, and contact our Customer Support 
Center or your dealers.

• Remove any remaining pieces of paper.

• Remove any dust or stains with a dry clean cloth.

Summary of Contents for DocuPrint C3300 DX









































































































































































































Reviews:

No comments

Related manuals for DocuPrint C3300 DX

LabelTac 4 Quick Start Manual preview
4
Brand: LabelTac Pages: 2
Canon Color imageCLASS MF8580Cdw Getting Started Manual preview
Color imageCLASS MF8580Cdw
Brand: Canon Pages: 36
Canon Color imageCLASS MF8580Cdw Settings Manual preview
Color imageCLASS MF8580Cdw
Brand: Canon Pages: 20
Canon Color imageCLASS MF8280Cw Settings Manual preview
Color imageCLASS MF8280Cw
Brand: Canon Pages: 24
Canon Color imageCLASS MF8080Cw Starter Manual preview
Color imageCLASS MF8080Cw
Brand: Canon Pages: 39
Canon Color imageCLASS MF8050Cn Starter Manual preview
Color imageCLASS MF8050Cn
Brand: Canon Pages: 32
Canon Color imageCLASS LBP7660Cdn Quick Setup Manual preview
Color imageCLASS LBP7660Cdn
Brand: Canon Pages: 2
Canon Color imageCLASS 8180c Quick Start Manual preview
Color imageCLASS 8180c
Brand: Canon Pages: 24
Canon CD-300 Printer Manual preview
CD-300
Brand: Canon Pages: 30
Canon C3000 - MultiPASS Color Inkjet Printer Parts Catalog preview
C3000 - MultiPASS Color Inkjet Printer
Brand: Canon Pages: 41
Canon Color imageCLASS MF8170c Specification preview
Color imageCLASS MF8170c
Brand: Canon Pages: 2
Canon Color imageCLASS MF8170c Facsimile Manual preview
Color imageCLASS MF8170c
Brand: Canon Pages: 98
Canon Color imageCLASS MF8170c Instructions Manual preview
Color imageCLASS MF8170c
Brand: Canon Pages: 8
Canon Color imageCLASS MF8080Cw Configuration Manual preview
Color imageCLASS MF8080Cw
Brand: Canon Pages: 46
Canon Color imageRUNNER LBP5360 Release Note preview
Color imageRUNNER LBP5360
Brand: Canon Pages: 3
Nantian Electronics PR9 Quick Reference Manual preview
PR9
Brand: Nantian Electronics Pages: 4
Xerox 4215 Operator'S Manual preview
4215
Brand: Xerox Pages: 414
Tektron ME1301 Operation Manual preview
ME1301
Brand: Tektron Pages: 72

Brands by name

Popular brands

Load more brands