Selecting Fax Options for Individual Jobs
8-13
Selecting Fax Options for Individual Jobs
This section includes:
■
■
Making the Image Lighter or Darker
■
■
Changing the Default Fax Job Settings
Setting the Fax Resolution
To set the fax resolution:
1.
On the printer console, press the
Fax
button.
2.
Select
Resolution
, and then press the
OK
button.
3.
Select an option from the list displayed, and then press the
OK
button.
■
Standard
: Select this for documents with normal sized characters.
■
Fine
: Select this for documents containing small characters or thin lines or documents printed
using a dot-matrix printer.
■
Super Fine
: Select this for documents containing extremely fine detail.The super fine mode is
enabled only if the remote machine also supports the Super Fine resolution.
■
Photo
: Select this for documents containing photographic images.
Note:
The factory default is
Standard
.
Making the Image Lighter or Darker
To lighten or darken an image before it is faxed:
1.
On the printer console, press the
Fax
button.
2.
Select
Lighten/Darken
, and then press the
OK
button.
3.
Press the
Forward
Arrow
or
Back Arrow
to lighten or darken the fax, and then press the
OK
button.
Note:
The factory default is
Normal
.
Delay Sending a Fax
To send a fax at a specified time (within 24 hours):
1.
On the printer console, press the
Fax
button.
2.
Select
Delayed Start
, and then press the
OK
button.
3.
Select
On
, and then press the
OK
button.
4.
Select the time to send the fax:
■
Select a number from
0
to
23
for the hour, and then press the
Forward
Arrow
or
Back Arrow
button to select minutes.
■
Select a number from
0
to
59
for minutes, and then press the
OK
button.
5.
Press the
Start
button.
The fax is scanned and saved to be sent at the time you specified.
Note:
If the printer is turned
Off
with a Delayed Start job stored, the job will be processed
immediately after the printer is turned back
On
.
