Fax Setup
8-2
Fax Setup
This section includes:
■
Setting up your printer for Fax
■
Installing the Fax driver (Macintosh user only)
Setting up your printer for Fax
Before faxing, you need only to ensure that the telephone line is plugged in, and select a country and
telephone number for the printer. To prepare the printer for faxing:
1.
If necessary, plug the telephone line from the wall into the FAX connector on the rear panel of the
printer.
You can also connect a telephone line out to a telephone if you wish.
2.
On the printer console, press the
System
button, and then select
Admin Menu
,
Fax Settings
,
Country
, and then press the
OK
button.
3.
Press the
Up Arrow
or
Down Arrow
button to select the country, and then press the
OK
button.
Note:
If you set your country in Power On Wizard, you do not need step 2 to 4.
4.
Select
Yes
when asked to restart the printer.
5.
On the printer console, press the
System
button, and then select
Admin Menu
,
Fax Settings
,
Your
Fax Number
, and then press the
OK
button.
6.
Use the alphanumeric keypad to enter the printer’s fax number, and then press the
OK
button.
Your printer is now ready to fax.
See also:
