BASIC CONCEPTS
Figure 2-5.
Virtual page origin
Form origin
All forms data described by FDL commands is positioned relative
to a point called the “form origin” (figure 2-6). This point is offset
from the virtual page corner by horizontal and vertical
displacement values, which you specify using the GRID
command. If none are specified, standard default values are used
to establish the form origin.
If variable data is merged with the form, set the form origin to
coincide with the beginning position of the variable data so the
form and variable data coordinate accurately. Standard computer
printing formats are stored on the system. Refer to the
“Predefined formats” section later in this chapter.
Figure 2-6.
Form origin
XEROX 4850/4890 HIGHLIGHT COLOR LPS FORMS CREATION REFERENCE
2-5
