CONTROLLER SPECIFICATIONS AND REQUIREMENTS
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS
5-7
The following illustration shows fan and vent locations on the
front and back of the controller.
Figure 5-5.
Sun Ultra 60 fan and vent locations to keep clear
1
Vent in front of processor
2
Fan in back of processor
3
Vent in back of processor
Do not:
•
Do not place the controller monitor on top of the processor.
•
Do not allow any piece of equipment to blow warm air into the
air intake vents of the processor.
•
Do not place the processor on its side, or in any other position
but the upright, vertical position shown in the previous figure.
•
Do not place the processor or monitor on top of the printer.
Summary of Contents for DocuPrint 180 NPS Series
Page 100: ......
