Xerox DocuColor 7000AP, System Administration Manual, Page: 61 / 92

DocuColor 7000AP/8000AP System Administration Guide
1-57
1. Tools Mode
8. Make the desired adjustments for one the Alignment Profile
features (Lead Registration, Side Registration, etc.).
NOTE: It is recommended that you choose only one
Alignment Profile feature until you run another set of Test
Prints and evaluate the registration on that output. If you want
multiple Alignment Profile features selected, individually select
each feature, run Test Prints for that feature, and evaluate the
output. After you determine that the output for the selected
feature is acceptable, then you can select another Alignment
Profile feature to adjust.
Touch the
Close
button on the appropriate screen to save the
settings and return to the Alignment Profile window.
9. Select
Test Print
to ensure that the output is satisfactory.
a. Touch the
2 Sided
button.
NOTE: If you want to check the registration for 1 Sided
prints only, touch the 1 Sided button.
b. Select
10
test prints by touching the
Up
arrow button to
change the number of test prints generated.
c. Touch the
Pattern Generator
button.
d. Retrieve your output test prints from the digital press.
e. Discard the first few prints, as inconsistency tends to be
greater with these images.