Xerox DocuColor 5750, System Administration Manual

Page: 24 / 68

1 TOOLS MODE
1-8 5750 SYSTEM ADMINISTRATION GUIDE
211 Color Registration on
Custom Palette You can change the color of each of the 18 colors on the
Edit Pad Custom Palette by selecting the color with the
Edit Pen, then entering the values for magenta, cyan and
yellow.
Factory Setting:
1 Magenta 0% 10 Magenta 68%
Cyan 0% Cyan 52%
Yellow 100% Yellow 0%
2 Magenta 0% 11 Magenta 51%
Cyan 0% Cyan 38%
Yellow 62% Yellow 0%
3 Magenta 0% 12 Magenta 20%
Cyan 0% Cyan 18%
Yellow 33% Yellow 0%
4 Magenta 48% 13 Magenta 32%
Cyan 2% Cyan 100%
Yellow 100% Yellow 22%
5 Magenta 31% 14 Magenta 21%
Cyan 4% Cyan 65%
Yellow 60% Yellow 16%
6 Magenta 15% 15 Magenta 10%
Cyan 0% Cyan 33%
Yellow 33% Yellow 7%
7 Magenta 100% 16 Magenta 0%
Cyan 0% Cyan 75%
Yellow 63% Yellow 77%
8 Magenta 68% 17 Magenta 1%
Cyan 0% Cyan 50%
Yellow 39% Yellow 50%
9 Magenta 33% 18 Magenta 0%
Cyan 0% Cyan 24%
Yellow 20% Yellow 30%
See Summary
column
212 Color Palette printing
option If you register new colors on the Edit Pad Custom Palette,
you can activate this feature and print a pallet for the Edit
Pad showing the new colors. Off
734 Selection of interface
connector You can select either RS 422 or Pseudo ECL, depending
on the interface connector to be used.
(Splash/SM ICS: RS 422 RM ICS L: Pseudo ECL) RS 422
735 Print Mode Entry
Time You can set the time (0 - 65,535 seconds, at intervals of 1
second) it takes to enter the Print Mode when the 5750
receives printing and scanning requests from external
equipment after completing a copy job (with the Job
Timeout feature activated) or during copying (with the Job
Program Incomplete Timeout feature activated). If you set
the time to 0 seconds, this feature is disabled. 30 seconds
Tools Program Numbers Chart
Program
No. Item Summary
Factory
Setting