3
3-19
Configuring a Windows NT server to support the DocuColor
•
For Windows NT 3.51, load the Windows NT PostScript printer driver and install the
DocuColor printer description provided with the user software, as described in the Get-
ting Started.
Repeat the installation for everyone who prints to the DocuColor.
•
For Windows 4.0, install the DocuColor PostScript printer description on the Windows
NT server (see the Getting Started).
The Windows NT PostScript printer driver is automatically installed with
Windows NT 4.0. The DocuColor PostScript printer description is also provided on
the User Software CD.
•
Repeat the installation for everyone who prints to the DocuColor.
Each server and workstation running the utilities with TCP/IP also needs the TCP/IP
protocol and the utility software.
The Installer installs a NET_WSCK.DLL file and a blank configuration
(NET_WSCK.INI) file. Running a utility for the first time automatically configures
the NET_WSCK.INI file.
Configuring a Windows NT server to support
the DocuColor
To configure a Windows NT 4.0 or 3.51 server to communicate with the DocuColor,
follow these general steps. More detail is provided in subsequent sections.
• Load the TCP/IP network protocol (see the next section).
• Enter the host name of the DocuColor in the host database used by your system (see
page 3-21).
• On the DocuColor Control Panel, perform Server Setup (see page 2-7), Network
Setup (page 2-9), Printer Setup (page 2-32), PS Setup (page 2-34), and Color Setup
(page 2-36).
• On the Windows NT server, create a printer for each DocuColor queue, install the
appropriate printer drivers (if necessary), and (optionally) share the printer on the
network (see page 3-23).
• Enter the host name and internal name of the DocuColor in the printer connection.
See page 3-30 for more information.
