Xerox DocuColor 40CP, Getting Started Manual, Page: 42 / 82

26 Installing User Software on a Windows Computer
13. Select No to printing the test page and click Next.
You will print the test page after you finish configuring the printer.
The necessary files are installed to your hard disk. When installation is complete, the
Properties dialog box appears.
14. Click OK.
You are notified that Setup is complete.
15. Click Exit.
The icon for your newly installed printer will appear in the Printers window.
16. Use the instructions for connecting to your network type (see “Completing the
Windows NT 4.0 printer connection” below).
Completing the Windows NT 4.0 printer connection
To print from Windows NT 4.0 you need to:
• Set up network servers, if any
• Set up the DocuColor 40 CP to accept print jobs from your computer
• Configure a port on each Windows NT computer for the network or connection
type
For this type of connection: See:
Parallel below
TCP/IP (lpr port) page 27
IPX (Novell) page 30