![background image](http://html2.mh-extra.com/html/xerox/docucolor-12/docucolor-12_color-manual_3372884069.webp)
3
3-9
Profile Manager
2.
Select DIC-new in the Simulation list, and click Profile Settings or double-click
DIC-new.
3.
Select the “Appear in Driver as” option, choose one of the predefined custom
simulation names (Simulation-1 through Simulation-10) from the menu, and then
click Apply.
N
OTE
:
Choose a name that is not already linked with another simulation. If you try to
define two profiles with the same name, you will get an error message.
For an output profile, the predefined custom names would be Output-1 through
Output-10.
N
OTE
:
While you cannot delete a preset profile, you can use the name of a preset
profile name for your edited profile when you select the “Appear in Driver as” option.
This replaces the preset profile with your own profile.
When you choose Profile Settings for an output profile, the Use Calibration Set
options also appear. You must calibrate the Fiery with this calibration set before
this option has any effect. If you have never measured for this calibration set, default
measurements will be used. For more information about calibration sets, see
In Profile Settings, you can also change profile descriptions for all non-locked profiles.