Xerox DFC155, Service Manual & Parts List

Page: 77 / 151

602E52970 5-7
04.10 Answer not allowed during Print and analyse protocol dump
post-message phase in ECM
>>
Code Cause of Error Action
04.11 No answer during Call again
post-message phase in ECM
04.12 Insufficient memory Call again
on receiver's side
05. 00 Transmission incomplete Call back and send missing pages again
due to RTN reception
07. 00 Transmission duration Call again
exceeding time set with SW09, bit 5-6
08. 00 Document jam Remove document
09. 00 STOP pressed during TX or RX None
10. 00 Text coding error Print and analyse protocol dump
at start of message
10.01 No connection due to Print and analyse protocol dump
incompatible correspondent
10.02 No reception due to no answer Print and analyse protocol dump
from correspondent during
handshake, or at the end of the block, or at
the end of a page with change in resolution
10.03 Line error due to incompatible Print and analyse protocol dump
speed
10.04 No commands received Print and analyse protocol dump
from correspondent
10.05 Text coding error Print and analyse protocol dump
(5 seconds without data)
10.06 No signal during Print and analyse protocol dump
reception of the message
>>