Xerox DFC155, Service Manual & Parts List

Page: 108 / 151

7-12 602E52970
3) Release the assembly of motherboard B and board NCU from the related latches
F and extract it from the base, then separate the boards (Fig. 7-17):
)
)
%
1&8
Fig. 7-17
4) Once the motherboard has been replaced, perform the LOAD DEFAULT (see
sect. 6.1.7), ALIGNMENT TEST (see sect. 6.1.1) and SCANNER SHADING (see
sect. 6.1.8) procedures.
Caution During re-assembly, ensure that the boards are properly inserted in the
related guides G (Fig. 7-18):
*
*
Fig. 7-18
screw