Xerox CopyCentre C35, Quick Reference Manual

Page: 184 / 189

Quick Reference Guide Page 11-9
T
roubleshooting
Image Loss
¾
When copying a document from a larger paper size to a smaller size, use Auto%
to reduce the image onto the smaller size.
¾
Use reduction i.e., copy at 90% instead of 100%.
¾
Select [Auto Cent er ] and run the job again.
¾
If scanning from the Document Glass, select [Manual Platen Input] and define
the document size. Register the document in the right rear corner and copy with
the cover down.
¾
Do not use heavily embossed paper.
Blurred images on output
¾
Load fresh paper.
¾
If copying from the Document Glass, check the quality of the originals, set the
input to
Manual Platen Input , close the cover and try again. Ensure that the
original is entirely flat against the Document Glass.
Missing characters on output
¾
Load fresh paper.
¾
Try using a smoother paper.
¾
Select darken if the original is light or the font is colored.
Gloss variations (coining)
¾
Check the quality of the original.
¾
If the original has large areas of solid density, adjust the contrast.
Ghosting
¾
Check the quality of the original.
¾
Clean the Document Glass, if it is being used.
¾
Rotate the original 180 degrees and try the job again.
The machine cannot sense the size of the original on
the glass
¾
Select [Original Input] in the Image Adjustment Tab and enter the size.
¾
Rescan the original, leaving the cover raised.