Xerox Copycentre C118, System Administration Manual

Page: 28 / 134

2 Product Overview
28 Xerox CopyCentre/WorkCentre 118 System Administration Guide
Ethernet Port
The Ethernet port is the default interface used on the machine.
If you need to change the speed setting of the Ethernet port, perform the following
steps:
1.
Select [Print Settings] on the [System
Settings] screen, and press the <Enter>
button.
2.
Press the <Enter> button on the
[Network/Port] screen.
3.
Select [Ethernet Settings] by selecting
[
T
] or [
S
] using the <Select> button.
4.
Press the <Enter> button.
5.
Select port speed by selecting [
T
] or
[
S
] using the <Select> button.
6.
Press the <Enter> button.
Auto
Detects transmission speed automatically at power on and adjusts itself accordingly.
100BASE-TX
Sets the transmission speed to 100 Mbps.
10BASE-T
Sets the network speed to 10 Mbps.
Resident Fonts
PCL Resident Fonts
One of the fonts in the following table can be selected as the default font for the
machine. Other bitmap and scalable fonts can be downloaded with print jobs sent to
the machine using printer drivers. The default is used when a font is not defined in the
PCL job stream. The PCL versions used are PCL5e and PCL6.
You can view the PCL fonts by printing the Fonts List. For more information on how to
print the list, refer to Product Overview chapter of the User Guide.