Device Settings
ColorQube™ 9301/9302/9303
Administration and Accounting
277
Auto Resume Timer
If the device is stopped during a job, this
feature determines if the device
automatically resumes the job after a set
period of time or whether it waits for user
intervention to resume the job. This can
prevent a user leaving the device in a
stopped or paused state.
•
Auto Resume
is selected to
automatically resume stopped
operations at the time designated.
Select the period of time the device
waits before resuming using the
arrow
buttons, between
15
and
120
seconds.
•
Wait for User
instructs the system to remain stopped until a user selects
Resume
or
Cancel
.
Held Job Timeout
Use this option to enable the device to
delete jobs which have been held in the
job list for a specified period of time and
have been abandoned by a user. E-mail,
network scanning, incoming server fax,
embedded fax and internet fax jobs are
not affected by this setting.
•
Enable
allows the device to
automatically delete held jobs after a
specified period, set the period of
time between
0
and
120
hours and
0
and
59
minutes using the
arrow
buttons.
•
Disable
instructs the device not to delete held jobs from the job list. The held jobs are only deleted
if the device is switched off.
System Timeout
Use to set whether the device should return to the default screen and feature settings after a set period
of time.
•
Enable
instructs the device to timeout after the specified period of time. Select the period of time
between 1 and 10 minutes using the slide bar.
•
Disable
should be selected if you do not want the device to automatically return to the default
settings after a set period of time.
