Xerox C8 - DocuPrint Color Inkjet Printer, System Administration Manual

Page: 77 / 148

DocuColor 8000/7000 System Administration Guide
1-53
1. Tools Mode
16. Select the Paper Type (E1-E6) as determined earlier in Step 4
of this procedure; refer to the screen below.
KEY POINT:
The above illustration is an example only. Your
actual selections for your print job may use different settings than
is shown above.
17. Touch the
Close
button to save these settings and return to
the
Machine Defaults 2
screen.
18. Exit Tools Mode.
19. Print five pages of each representative image as determined in
Step 8.
For example, run five pages of a sample page of your job with
the highest area coverage and set aside in one pile. Run five
pages of a sample page of your job with the lowest area
coverage, and set aside in another pile for evaluation in
Step 20.
1.
Type E1
is selected;
this is the selection made
in Step 4 of this procedure.
2. Ensure that
Type E1
is selected
on the Decurler Setup screen.