2.
Load a sheet of paper with the printable side facedown.
• Load letterhead with the printable side facedown and the top
edge entering the printer first for one-sided printing.
• Load letterhead with the printable side faceup and the top
edge entering the printer last for two-sided printing.
• Load envelope with the flap side up and against the right side
of the paper guide.
3.
Feed the paper until its leading edge gets pulled in.
Warning:
To avoid paper jams, do not force paper into the
manual feeder.
SSeettttiinngg tthhee PPaappeerr SSiizzee aanndd TTyyppee
1.
From the control panel, navigate to
Settings > Paper > Tray
Configuration > Paper Size/Type
, then select a paper source.
For non-touch-screen printer models, press
to navigate
through the settings.
2.
Set the paper size and type.
U
Uppddaattiinngg ffiirrm
mw
waarree
Some applications require a minimum device firmware level to
operate correctly.
For more information on updating the device firmware, contact
your Lexmark representative.
1.
From the Embedded Web Server, click
Settings
>
Device
>
Update Firmware
.
2.
Browse to locate the required flash file.
3.
Apply the changes.
C
Coonnffiigguurriinngg W
Wii--FFii D
Diirreecctt
®
®
Note:
This feature is available only in some printer models.
Wi-Fi Direct is a Wi-Fi-based peer-to-peer technology that allows
wireless devices to connect directly to a Wi-Fi Direct-enabled printer
without using an access point (wireless router).
1.
From the control panel, navigate to:
Settings
>
>
Network/Ports
>
>
Wi-Fi Direct
>
2.
Configure the settings.
•
Enable Wi-Fi Direct
—Enables the printer to broadcast its
own Wi-Fi Direct network.
•
Wi-Fi Direct Name
—Assigns a name for the Wi-Fi Direct
network.
•
Wi-Fi Direct Password
—Assigns the password for
negotiating the wireless security when using the peer-to-
peer connection.
•
Show Password on Setup Page
—Shows the password on
the Network Setup Page.
•
Auto-Accept Push Button Requests
—Lets the printer
accept connection requests automatically.
Note:
Accepting push-button requests automatically
is not secured.
C
Coonnnneeccttiinngg aa M
Moobbiillee D
Deevviiccee ttoo tthhee PPrriinntteerr
Note:
This feature is available only in some printer models.
4