Xerox B210DNI, User Manual

Page: 63 / 205

Network Connectivity
Xerox
®
B210 Printer
User Guide
63
• To search for an SSID, click Search Available and click the drop-down menu. Select an SSID
from the list.
Note: To refresh the list of available networks, click
Refresh
.
• To enter the SSID, click
Enter SSID
, then in the field, type the SSID.
5. For Security Type, select
WPA/WPA2-Enterprise
.
6. For Encryption Type, select an option.
7. For 802.1x Authentication, select the authentication method that your wireless network uses.
•
If you select
PEAP
, the enter the required details in the Identity Name, Username and User
Password fields.
8. For Root Certificate Setup , to upload a root certificate, do the following steps.
a. For Upload Root Certificate , to locate and select the file, click Browse .
b. Select the certificate required, then click Open .
c. Click Download .
9. For Address Acquisition , select a protocol option. If you select Static , you can change the IP
Address
,
Subnet Mask
, and
Gateway Mask
, as needed.
10. Click
Apply
.
Wi-Fi Direct
TM
You can connect to your printer from a Wi-Fi mobile device, such as a tablet, computer, or smart phone,
using Wi-Fi Direct.
Note:
• Wi-Fi Direct is disabled by default.
• When configuring settings in Properties, you are prompted to enter the Administrator
account user name and password. For information about logging in as an administrator,
refer to
Accessing the Xerox
®
CentreWare
®
Internet Services Administrator Account .
Configuring Wi-Fi Direct Using Xerox
®
CentreWare
®
Internet Services
1. In Xerox
®
CentreWare
®
Internet Services, click Properties

Connectivity

Protocols .
2. Click Wi-Fi Direct
TM
.
3. For Wi-Fi Direct , select On .
4. For Device Name, type a name to appear in a list of available wireless networks and devices.
5. For IP Address, use the default or type a new IP Address.
6. To set the printer as Group Owner for a Wi-Fi Direct group, similar to a wireless access point, select
Activate
.
7. Enter a Network Key or use the default value.
8. To hide the Network Key, select the check box.
9. Click
Apply
.