Xerox ApeosPort-II 3000, User Manual

Page: 304 / 619

10 System Settings
302
Sys
tem
S
et
tin
g
s
10
Scan Mode Settings
Make settings relating to the scanner feature.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• When [Fax Server] is selected in the System Settings, [Scan Mode Settings] is replaced with
[Scan/Fax Mode Settings].
When using CentreWare Internet Services, more detailed settings are possible. For more details, refer to
"CentreWare Internet Services" (P.226), and refer to the Network Administrator Guide.
The following shows the reference section for each item.
General Settings Tab.................................................................................................................302
Scan Defaults ............................................................................................................................302
Scan to PC Defaults ..................................................................................................................304
Original Size Defaults...............................................................................................................304
Output Size Defaults .................................................................................................................304
Reduce/Enlarge Presets.............................................................................................................304
Other Settings............................................................................................................................305
1
On the [System Settings] screen, select [System Settings].
For the method of displaying the [System Settings] screen, refer to "System Settings Procedure" (P.254).
2
Select [Scan Mode Settings].
3
Select the item to be set or changed.
General Settings Tab
You can set items relating to the [General Settings] screen display.
Feature in 2nd Column
You can set the features shown in the second column of the [General Settings] screen.
You can select from [2 Sided Originals], [Scan Resolution], and [Reduce/Enlarge].
Reduce/Enlarge - Buttons 2, 3, and 4
This item can be set when [Reduce/Enlarge] is selected in [Feature in 2nd Column].
Set the magnification shown in the second to fourth rows from the top of the 5 feature buttons
shown in [Reduce/Enlarge] in the [General Settings] screen.
Select the magnification from the registered R/E Preset buttons.
For information about R/E Preset buttons, refer to "Reduce/Enlarge Presets" (P.304).
Scan Defaults
This menu allows you to set the default settings of scan features. When the power is
turned on or the machine returns from a Power Save mode, or when the <Clear All>
button is pressed, the system returns to the defaults specified under this menu. By
setting frequently-used features and values as defaults, you can simplify scan
operations.
The settings are reflected after the machine is turned off and then back on.