Xerox ApeosPort-II 3000, User Manual

Page: 114 / 619

4 Fax
112
Fa
x
4
Operations during Faxing
The following describes the available operations during faxing. The following shows the
reference section for each feature.
Stopping the Fax Job.................................................................................................................112
Changing the Scan Settings.......................................................................................................113
Stopping the Fax Job
To cancel scanning a fax document, follow the procedure below.
1
Press either [Stop] on the touch
screen or the <Stop> button on the
control panel.
2
Select [Cancel].
Note • If two or more jobs are in
progress, a confirmation
screen appears for each job.
Select [Start] or [Cancel]
depending on whether you
want to start or cancel the job.
„ If the screen shown in step 2 does not appear even after you press the <Stop>
button on the control panel:
Depending on the jobs in progress, screens for canceling jobs may not appear. In that
case, use the following procedure to cancel a fax job on the [Current and Pending Jobs]
screen in Job Status.
1
Press the <Job Status> button.
1 2 3
4 5 6
7 8 9
0 #
C
<Stop> button
1 2 3
4 5 6
7 8 9
0 #
C
<Job Status>
button