Introduction Printer Options Menu Tree Technical Info Error Messages Troublesho
Introduction 1-10
Introduction
1
Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting
Reference Guide 8142/8160
Basic and Microbanding Calibration Procedures
Before you start
The calibration procedures in this document are useful for 8142/8160 printers with firmware level 1.5.0 and later.
Confirm that you have at least that firmware level before you begin.
Checking firmware level
1
At the Control Panel select
Utility/Service Menu/About
.
2
Check for version 1.5.0 of the firmware (first line in display).
3
If the firmware version is:
·
at least version 1.5.0 – proceed with calibration.
·
prior to version 1.5.0 – update the firmware in the printer before you using these procedures.
Calibration Flowcharts
·
For general calibration
– use flowchart in Figure 1.
·
After removing/installing a print cartridge
– use flowchart in Figure 2.
