18
Phaser 7700 Color Printer
Color and Color Sampler Charts
Adjusting Color Balance
Over the life of the printer, colors may change. For example, reds may begin to take on a
purple cast, or blues may take on a green cast. This can happen during the normal use of a
color printer, during set-up or when toners and print cartridges are replaced. It can be
easily remedied by adjusting the color balance.
This front panel procedure involves printing a demonstration page, a series of test pages
and adjusting the colors based on the appearance of the test pages.
Note
At any time, you can reset the printer to the previous settings or to the factory
defaults.
Printing the Color Calibration Tutorial
The Color Calibration Tutorial contains an overview of the color adjustment procedure.
Before starting this procedure, print and review the Color Calibration Tutorial.
1.
On the front panel, scroll to the
Support
menu by pressing the
Up
or
Down Arrow
key.
2.
Press the
OK
key.
3.
Select the
Improve Print Quality?
menu by pressing the
Down
or
Up Arrow
key.
4.
Press the
OK
key.
5.
Select the
Calibrate Colors Menu
by pressing the
Down
or
Up Arrow
key.
6.
Press the
OK
key.
7.
Select the
Print Tutorial Page
menu item by pressing the
Down
or
Up Arrow
key.
8.
Press the
OK
key to print the tutorial page.
9.
Follow the instructions on this page to adjust the color balance.
