Networking Setup Guide
33
Network Protocols
Disabling and Enabling Protocols Using the Front
Panel
1.
With
Menus
highlighted, press the
OK
key.
2.
Scroll to
Network Setup Menu
by pressing the
Arrow Up
or
Arrow Down
key.
3.
Press the
OK
key.
4.
Scroll to
TCP/IP Address Menu
by pressing the
Arrow Up
or
Arrow Down
key.
5.
Press the
OK
key.
6.
Scroll to
DHCP/BOOTP, TCP/IP, EtherTalk, NetWare,
or
IPP
by pressing the
Arrow Up
or
Arrow Down
key.
7.
Press the
OK
key.
8.
Scroll to display either
On
or
Off
by pressing the
Arrow Up
or
Arrow Down
key.
9.
Press the
OK
key.
10.
To exit the menu system, scroll to
Exit
and press the
OK
key.
Disabling Protocols Using CentreWare IS
1.
Connect to the printer via CentreWare IS (see
page 24
).
2.
On the main CentreWare IS page, click
Properties
.
3.
On the left side of the page, in the Protocols group, select the protocol to be disabled.
This displays the page for that protocol.
4.
On the page are fields labeled with the settings for the protocol. To disable a setting or
protocol, select
Off
5.
Click
Save Changes
at the bottom of the page.
