background image

Networking Setup Guide

21

EtherTalk Configuration

Changing the Printer’s Name (Optional)

The name is displayed on the Startup Page and Configuration Page. The name also appears 
in the 

Chooser

. The name can be up to 31 characters long. It may contain any printable 

characters; however, the characters @ :   = * are deleted from the name used on AppleTalk. 
A change is persistent across printer power cycles.

Using Apple Printer Utility

1.

Locate the 

Apple Printer Utility

 included on your printer’s CD-ROM.

2.

Double-click the 

Apple Printer Utility

 icon to display the 

Printer Selector

 window. 

3.

Select the zone (if applicable) and the printer. Click 

Open Printer

. A dialog box is 

displayed containing 

Printer Information

 and 

Printer Preferences

.

4.

Click the triangle to the left of 

Printer Preferences

5.

Click the triangle to the left of 

Name

; this displays a dialog box containing a field for 

the printer’s name. 

6.

Type the new name in the field.

7.

Click 

Send

.

8.

Open the 

Chooser

 to reselect the printer with its new name. 

Using CentreWare IS

1.

Connect to the printer via CentreWare IS (see 

page 24

).

2.

From the main CentreWare IS page, click 

Properties

3.

In the 

Protocols

 group on the left side of the screen, click 

EtherTalk

4.

In the 

Printer Name

 field, type the desired printer name.

5.

Click 

Save Changes

 at the bottom of the page. 

Notes Regarding Duplicate Printer Names on a Network

If you have more than one printer in the same zone and you choose a name for one 
printer that is already assigned to another, the second printer registers itself on the 
network with the number 1 appended to the name. For example, if you attempt to 
assign a printer the name 

Xerox

 and another printer in the zone already has the same 

name, the printer you are naming appears on the network as 

Xerox-1

.

The added number is recalculated each time the printer is turned on. If you have more 
than one printer with the same name on the network, the printers’ names on the 
network depend on the order in which the printers are turned on. To avoid this 
confusion, it is recommended that you assign each printer on the network a unique 
name.

The added number is displayed in the 

Chooser

, on the printer’s front panel, and on 

the Startup Page. On the Configuration Page, the name, without the characters @ : = *, 
and with the added number, appears in the 

EtherTalk

 area. The 

Printer Name

 under 

General Information

 is the name as it was set, not as it is displayed in the 

Chooser

.

Summary of Contents for 7700











































Reviews: