Xerox 7400DN - Phaser Color LED Printer User Manual Download Page 106

Page: 106 / 196

Cleaning the Printer

Phaser® 7400 Color Printer

5-2

Cleaning the Printer

This section includes:

■

Cleaning the Outside of the Printer

on page 5-2

■

Cleaning the LEDs

on page 5-3

For safety information, see

User Safety

on page A-1.

Cleaning the Outside of the Printer

To remove stains, clean the outside of the printer using a soft, damp, cloth moistened with a
mild neutral detergent. Do not spray detergent directly onto the printer.

Warning:

To prevent electric shock, turn the printer off and unplug the power cord from the

electrical outlet before cleaning the printer.

Use only an approved toner vacuum to clean the printer. Do not lubricate the printer with oil.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for 7400DN - Phaser Color LED Printer





































































































































































































Search results

Summary of Contents for 7400DN - Phaser Color LED Printer

Reviews:

Related manuals for 7400DN - Phaser Color LED Printer

Brands by name

Popular brands

Xerox 7400DN - Phaser Color LED Printer, User Manual

Search results

Summary of Contents for 7400DN - Phaser Color LED Printer

Reviews:

Related manuals for 7400DN - Phaser Color LED Printer

Brands by name

Popular brands