11.
SCALE command messages
The SCALE command enables scanned graphic images (fonts,
forms, and logos) to print at an enlarged or reduced size under
certain conditions. Refer to your 4635 LPS Operations Reference
chapters on HIP-accessed communicating modes and using
graphics for detailed information about the SCALE command.
**Cannot open input file: xxxx
The requested input file is not found.
Action
Verify the input file name and reenter the command. (Refer to
your 4635 LPS Operations Reference chapter on managing LPS
resources for additional information.)
**Cannot open output file: xxxx
The requested output file cannot be created or the required
space is not available on the disk.
Action
1. Verify the output file name and reenter the command. (Refer
to your 4635 LPS Operations Reference chapter on managing
LPS resources for additional information.)
2. Compress the disk(s) to free more contiguous (adjoining)
sectors on the disk(s).
**Cannot scale files of requested type: xxxx
The requested file cannot be scaled.
Action
Verify the file type and reenter the command. The file type must
be FRM, FNT, FN6, LG0, or LG6. (Refer to your 4635 LPS
Operations Reference chapter on managing LPS resources for
additional information.)
**Dashing not supported**
Scaling of the requested form has produced a pattern of lines
and spaces that SCALE cannot equate to 600 spi.
Action
None.
**DIAG - CHAR x in yyyy exceeds byte escape; set to
0. 425in**
The character named in the message has a width that has been
set to .425 by SCALE. Widths that have been overridden in this
way no longer represent the actual size of the characters and
may yield output which appears compressed.
Action
None.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
11-1