manualshive.com logo in svg

Xerox 721, Message Manual, Page: 203 / 339

Share
Download
Xerox 721 Message Manual Download Page 203

PR (HARDCOPY GRAPHICS PRINTING COMMAND) MESSAGES

PR9400

Error during file directory search.

A disk error occurred while the system was searching for a
requested file. 

Action

1. Retry the HARDCOPY command.  
2. If the problem continues, contact your systems specialist or

Xerox Customer Service.  

PR9500

Error during xcs file creation.

A disk error occurred while a .XCS file sent from a workstation
was being created on disk.  File creation is aborted.  

Action

1. Resend the file.  
2. If the problem recurs, contact your systems specialist or

Xerox Customer Service. 

PR9520

Cannot open RECTSK.SYS.

The system is unable to initiate job recovery after a software
failure because a hardware error makes the recovery file
inaccessible. 

Action

1. Restart the job.  
2. If the message reappears, contact your systems specialist or

Xerox Customer Service.  

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE

9-3

Summary of Contents for 721




















































































































































































































































































































































Reviews:

No comments