Xerox 5400N - Phaser B/W Laser Printer, Service Quick Reference Manual, Page: 258 / 503

Phaser 5400 Laser Printer Service Guide 229
Print Engine Controller Board Test Print
Enter Diagnostics Mode. Refer to page 221 for instructions on entering Diagnostics
and page 224 for navigating the Diagnostics menu.
The Print Engine Controller Board Test Print is used to bypass the System Controller
Board. The “Print Pattern” test print is an excellent tool for isolating and diagnosing
printer feed, paper path, registration and image-quality problems. Refer to the
Registration section
page 231 for information on using test prints to help adjust print
image registration.
The Control Panel Test Legend to the right will aid in
navigating through the variety of test prints available.
Upon entering Diagnostics Mode, the Control Panel LCD
will momentarily display “Entering IOT Diagnostics
Mode.” Then the LCD will display “Main Menu / Component Test.
Note: An asterisk (*) indicates a factory default setting.
By selecting various combinations of Input Tray, Output Tray and Duplex ON/OFF,
you can test most of the printer’s functional areas as well as print quality.
Table 122 Test Print Menu
Press [1] or [5] to display: ⇒ Main Menu
Test Print
Press [2] or [6] to display:
⇓
Press [3] or [7] to display:
⇓
Comment
Test Print
Print Pattern Press [4] to start the test
print selected.
Note: Print Pattern
generates
continuous test
prints.
Press [0] to stop.
Input Tray Input Tray
Tray 1* Press [4] to select the
paper feed tray desired.
Input Tray
Tray 2 Press [4] to select the
paper feed tray desired.
Input Tray
Tray 3 Press [4] to select the
paper feed tray desired.
Input Tray
MBF
(Multi-sheet Bypass Feeder) Press [4] to select the
paper feed tray desired.
Output Tray Output Tray
Standard* Press [4] to select the
output Tray desired.
Output Tray
HCS Outputs to the High
Capacity Stacker
Test Print
Duplex Duplex
Off* Single side printing
Duplex
On Both sides of page
printed
0 1 2 3
4 5 6 7
0 1 2 3
On Line Menu Up Item Up Value Up
4 5 6 7
Enter Menu
Down Item
Down
Value
Down
s5400-352