Xerox 5400N - Phaser B/W Laser Printer, Service Quick Reference Manual, Page: 253 / 503

224 Phaser 5400 Laser Printer Service Guide
Diagnostics Menu Map
The table below summarizes the operation of the Control Panel keys in Diagnostics
Mode.
Note: An asterisk (*) indicates a factory default setting.
Table 121 Diagnostics Menu Map
Press [1] or [5] to display:
⇒
Main Menu
Test Print
Press [2] or [6] to display: ⇓ Press [3] or [7] to display: ⇓
Print Pattern
Input Tray Input Tray / Tray 1*
Input Tray / Tray 2
Input Tray / Tray 3
Input Tray / MBF
Output Tray Output Tray / Standard*
Output Tray / HCS
Duplex Duplex / Off*
Duplex / On
Press [1] or [5] to display: ⇒ Main Menu
NVM Config
Note: When prompted for password, press [0], [7], [3] & [4] to gain entry.
Press [2] or [6] to display:
⇓
Press [3] or [7] to display:
⇓
NVM Config
Resolution (R) Read-only
Laser Density (R) Read-only
Fuser Stdby Temp (R) Read-only
Fuser Run Temp
Front Tray Size
Front Tray Opt (R) Read-only
Process Tray 1
Process Tray 2
Process Tray 3
Process MBF
Scan Tray 1
Scan Tray 2
Scan Tray 3
Scan MBF
Full Stack Count