Paper tray handling and supported paper types
Note: Automatic detection is not available for Tray 5, the bypass tray.
Automatically Recognized
Standard Paper sizes
Setting direction
Size (mm)
B5 LEF
257.0x182.0
7.25x10.5(Exective)* LEF
266.7x184.2
A4 SEF
210.0x297.0
A4 LEF
297.0x210.0
8.0x10 LEF
254.0x203.2
8.5x11 SEF
215.9x279.4
8.5x11 LEF
279.4x215.9
8.5x13 SEF
215.9x330.2
8.5x14 SEF
215.9x355.6
B4 SEF
257.0x364.0
16-kai(TFK)* LEF
267.0x194.0
16-kai(GCO)* LEF 270.0x195.0
8-kai(TFX)** SEF
267.0x388.0
8-kai(GCO)** SEF
270.0x390.0
A3 SEF
297.0x420.0
11x17 SEF
279.4x431.8
12x18 SEF
304.8x457.2
12.6x17.7 SEF
320.0x450.0
12.6x19.2 SEF
320.0x488.0
13x18 SEF
330.2x457.2
13x19 SEF
330.2x482.6
*
7.25”x10.5”/16-kai (TFK)/16-kai(GCO) to be switched with NVM
** 8-kai
（
TFX
）
/8-kai(GCO) to be switched with NVM
Non-standard paper sizes maximums:
•
Paper width 210.0mm - 330.2mm (13”)
•
Paper length in process direction 182.0mm - 488.0mm (19.2”)
The product supports printing on ordered stock but does not support ordered stock recovery
(including tabs). If there is a paper jam, the operator will need to manually reset the stock order in
the paper tray back to Tab 1.
Qualified media for trays
For optimum media selections, refer to the Recommended Materials List available from your
Xerox representative. Additional information is contained in the Materials Usage Guide included
with the documentation you will receive.
Best performance is only achieved using Grade A paper. The use of non Grade A paper may
result in more frequent service calls and a higher jam rate due to contamination.
22
