User Interface
Chilli Dimmer 73-853-00 Issue 8
Page 21 of 30
Edit Memory
Stand Alone Mode
- This option
allows you to edit the channel
values and fade time of a
programmed memory stored on
the dimmer.
Select the
Edit Memory
option
from the Memories menu, and
press the ENT key. The screen
shows:
Edit Memory
Xx
If the memory is
unprogrammed
- a star (*) is shown next to the
memory number and the memory
cannot be edited.
Use the numeric keypad or cursor
keys to select the required
memory (1-12), then press the
ENT key to confirm.
If the memory is
programmed
-
the dimmer outputs the selected
memory and the screen shows:
Channel: 1
Level: xxx
The cursor is shown in the
Channel
field. The
Level
field
shows the programmed value for
the channel.
Adjust the level of each channel
as required. This operation uses
the same user interface as the
Set
Channel Level
function in
Manual
Control
.
Press the ESC key. The screen
shows:
Memory: xx
Fade Time: xx
The
Memory
field
is
for
information
only.
The
cursor
appears in the
Fade Time
field.
Use the numeric keypad or cursor
keys to adjust the fade time as
required (1 - 60 seconds).
Press the ENT key to save the
fade time and the channel levels
into the memory. The screen
briefly shows a confirmation, and
then returns to the
Edit Memory
screen.
The memory is removed from the
outputs.
Edit Memory
Network Mode
- This option
allows you to edit the channel
values and fade time of a
programmed
memory
for
a
selected area stored on the
dimmer.
Select the
Edit Memory
option
from the Memories menu, and
press the ENT key. The screen
shows:
Area: 1
Memory: xx
If the memory for the chosen area
is
unprogrammed
- a star (*) is
shown next to the memory
number and the memory cannot
be edited.
The cursor appears in the
Area
field. Enter the required area
number using the numeric keypad
or cursor keys, then press the
ENT key.
If the area number is valid, the
cursor moves to the
Memory
field.
Use the numeric keypad or cursor
keys to select the required
memory (1 - 12), then press the
ENT key to confirm.
If the memory for the chosen area
is
programmed
- the dimmer
outputs the selected memory and
the screen shows:
A(xx)Channel: 1
Level: xxx
The area number field A(xx) is for
information only. The cursor is
shown in the
Channel
field.
The
Level
field
shows
the
programmed
value
for
that
channel in the memory.
Adjust the level of each channel
as required. This operation uses
the same user interface as the
Set
Channel Level
function in
Manual
Control
.
Note - Only those channels
which are assigned to the
specified area may be selected
and edited.
Press the ESC key. The screen
shows:
Area xx Mem xx
Fade Time: xx
The Area and Memory fields are
for information only and are not
editable.
The cursor appears in the Fade
Time field.
Use the numeric keypad or cursor
keys to adjust the fade time as
required (1 - 60 seconds).
Press the ENT key to save the
fade time and the channel levels
into the memory.
The screen will briefly show a
confirmation, and then return to
the
Edit Memory
screen.
The memory is removed from the
outputs.
