Apollo-X User Manual Version 0.9
15
Watch Circle Parameters (Type WC)
At start-up, any Watch Circle parameters are transmitted, regardless if the system will be used.
This is also the message that is displayed if any Watch Circle commands are used, to keep
XeosOnline up to date on circle status.
Ascii: WatchCircle: ENABLED, Latitude: 44.000000, Longitude: -
63.000000, Radius(m): 10000
Ascii: WatchCircle: DISABLED
Watch Circle Message
WatchCircle
Shows the enabled or disabled state of the watch circle
Latitude
If enabled, the latitude portion of the position of the center of the
watch circle
Longitude
If enabled, the longitude portion of the position of the center of the
watch circle
Radius(m):
If enabled, the radius of the set watch circle
