13
Air Control Handle
The stove’s output is regulated through the Twinfire
®
air control; to reduce the heat output tilt
the knob forward; to increase the heat output tilt the knob backward. The stove’s heating
output is mainly determined by the amount of burned wood.
ALSO NEVER ADD MORE THAN 3 POUNDS (1.5 KG) OF WOOD (ABOUT 2-3
LOGS). OTHERWISE THE STOVE COULD GET OVERHEATED, WHICH
CAN CAUSE IRREPARABLE DAMAGE.
THIS KIND OF DAMAGE IS NOT COVERED BY WARRANTY.
If there is a situation of a poor draft, the stove should not be reduced to the lowest setting of the
Twinfire
®
air control, or heating up will take longer. Place small pieces of wood until the
chimney is well heated. This can take up to one to two hours. The combustion is optimal when
the flames glow light yellow to blue. If too high, use fewer and larger pieces of wood and adjust
the air con- trol.
Caution: Open the door only for short periods of time.
