6
Note:
You can connect the HDD data cable and the power cable first and then fix the HDD in the
device.
Please pay attention to the front cover. It adopts the vertical sliding design. You need to
push the clip first and then put down.
1.5
Front Panel
This series product has two types of front panels.
1.5.1
Standard 1U Series
The front panel is shown as in Figure 1-1.
Figure
1-1
1.5.2
Simple Entry Level Series and Simple Lite Series
The simple entry level and simple lite series is shown as in Figure 1-2.
4. Turn the device upside down
and then turn the screws in
firmly.
5.
Fix the HDD firmly
.
6. Connect the HDD cable and
power cable.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
8. Secure the screws in the
rear panel and the side panel.