22
2.5.1.2
Activation Snapshot
Please follow the steps listed below to enable the activation snapshot function. After you
enabled this function, system can snapshot when the corresponding alarm occurred.
In Encode interface, click snapshot button to input snapshot mode, size, quality and
frequency.
In General interface please input upload interval.
In Detect interface please enable snapshot function for specified channels. Or in Alarm
interface please enable snapshot function for specified channels (
Please note simple
lite series product does not support alarm function
)..
Please refer to the following figure for detail information. See Figure 2-9.
Figure
2-9
2.5.1.3
Priority
Please note the activation snapshot has the higher priority than schedule snapshot. If you
have enabled these two types at the same time, system can activate the activation snapshot
when alarm occurs, and otherwise system just operates the schedule snapshot.
2.5.2
Image FTP
In Network interface, you can set FTP server information. Please enable FTP function and
then click save button. See Figure 2-10.Please refer to the
User’s Manual
included in the
resource CD for detailed information.
Please boot up corresponding FTP server.
Please enable schedule snapshot or activation snapshot (Chapter 2.3.3) and then system
can upload the image file to the FTP server.
