24
OSD Menu
_
Privacy
You can hide some parts of the screen for privacy masking. A total of 16 diVerent privacy masking zones are available.
The cameras support square privacy masks or advanced polygon masks.
BOX
-
ZONE NUM : Select the zone number you want to setup.
-
ZONE DISP : To enable it, turn the display option ON.
-
H-POS : Move the Zone position Left or right. The higher the number, the zone will move to the right.
-
V-POS : Move the Zone position up or down. The higher the number, the zone will move down.
-
H-SIZE : Reset the zone‘s size horizontally. The higher the number, the right side panel will move further to the right.
-
V-SIZE : Reset the zone’s size vertically. The higher the number, the bottom side panel will move further down.
-
Y LEVEL : The higher the number, the brighter the color will appear.
-
CR LEVEL : The higher the number, the more red tone will be added to the zone’s color.
The lower the number, the more green will be added to the zone’s color.
-
CB LEVEL : The higher the number, the more red tone will be added to the zone’s color.
The lower the number, the more red will be added to the zone’s color.
*
High CB Level + High CR Level = Red
*
High CB Level + Low CR Level = Blue
*
Low CB Level + High CR Level = Orange
-
TRANS : Set the mask’s transparency level from 0~3. The default value is 2.
PRIVACY
EXPO RGB D&N FUNC MOTI PRIV SET EXIT
1
BOX
POLYGON
EXIT JUMP
ON
OFF
BOX
ZONE NUM
ZONE DISP
H-POS
V-POS
H-SIZE
V-SIZE
Y LEVEL
CB LEVEL
CR LEVEL
TRANS
RETURN
0
ON
12
2
3
3
10
10
10
2
1
Summary of Contents for XPANHDA180A-6MP
Page 1: ......
