User Manual
Bobcat-640-GigE&CL Camera
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third party
without written permission from Xenics.
Xenics nv
T +32 16 38 99 00
Doc Ref: ENG-2012-UMN020
Ambachtenlaan 44
F +32 16 38 99 01
Issue: R000.12
BE-3001 Leuven
Belgium
www.xenics.com
Date: 29/10/2013
XF-104_02/20-01-2012
Page 14 of 24
2.2. Bobcat-640-GigE & CL Specifications
The camera specifications are listed in
Feature
GigE
CL
Unit
Imaging performance
Frame rate
100
Hz
Window of interest
Yes (minimal window: 32x4)
Exposure time range
1-40000
(1)
µ
s
Sensitivity
High Gain
1.28
electrons/ADU
Sensitivity
Low Gain
16.57
electrons/ADU
Readout mode
Integrate Then Read (ITR)
Integrate While Read (IWR)
On-board image
processing
-
Imaging correction (fixed NUC for Bobcat-GigE,
TrueNUC for Bobcat-CL),
-
Auto-Gain and Offset
-
Auto-Exposure (Only for Bobcat CL)
-
Trigger possibilities
A to D conversion
resolution
14
bit
Interfaces
Image acquisition
and Camera control
GigE Vision
Camera Link
Trigger
in or out
Power Requirements
Input Voltage
12±10%
V
Power consumption
(2)
4
3
W
Physical characterisctics
Dimensions
(3)
55x55x81.7
55x55x72
mm
3
Camera weight
(3)
334 without lens
285 without lens
g
Environmental specifications
Ambient operating
temperature
-40 to 60
[tbc]
°C
Vibration
4.3G (20 to 1000 Hz)
G
Shock
40G (11ms, half-sine profile)
G
Table 2-2 Specifications Bobcat-640-GigE and CL
(1)
At 25°C FPA temperature
(2)
Typical value, measured without TEC
(3)
Without Lens
The design and specifications for the products described above may change
without notice.
i
