01. Power Button: Turn the monitor ON or OFF.
02. Mirror Button: Enable or Disable the mirroring of the display. Continue to press it and
choose the mirroring you want.
03. Dimmer Button: Dim the brightness of the display by pressing this key continually to
set the brightness level of the display. (Only available when auto sensor is disabled.)
04. Mute Button: Mute the speaker. Press again to restore the voice of speaker.
05. Display Button: Display the message of the current input signal on the screen.
06. Sleep Button: Enable or disable to the sleep timer. Press this button to select and set
the time to turn off the monitor automatically.
07. Picture Button: Enable to select the picture mode you prefer. Press this button and
then you can select standard, user, bright or soft.
08. PC auto button: Enable to adjust the picture automatically, only available in VGA mode
09. Menu Button: Enable the OSD menu. Press this button again to exit.
10. Source Button: Enable to switch to different source input. (VGA, HDMI, AV, CCD)
11. Vol+ / Vol- Button: Increase or Decrease the Volume.
12. Up / Down Button( / ): Navigate Up or Down in OSD menu.
13. Left / Right Button( / ): Navigate Left or Right in OSD menu, as well as decreasing
or increasing the value of setting in OSD.
14. Enter Button: confirm the setting or selection.
MENU
DISPLAY
SOURCE
SLEEP
VOL-
PICTURE
VOL+
PC AUTO
MIRROR
POWER
DIMMER
MUTE
Remote Control
7
|
