SB-02&05
User Manual
XELTEK Automatics
SB0X
XELTEK. 2019. All rights reserved.
User Manual
Rev. 03 - 5th MAY 2020
12 of 200
3.3.6.
Automatic programming
Start
o
Start the programming session
Pause
o
Only when the pause [paused] prompt to enter the pause state.
o
The machine will stop right after the current movement.
o
The button would be disable if the clear up process is under way.
Clear up
o
All the sockets will be cleared
Reset
o
Reset the status of the programmers
Vision check
o
On - Enable
Device check
o
On - Enable
3.3.7.
Reports
Programming information
3.3.8.
Connect
Connect to SP7500
