SuperPro
®
6100 Programmer
1296 Kifer Rd. Suite #605
Sunnyvale, CA 94086
Tel: +1 408-530-8080
Fax: +1 408530-0096
Chapter 2 System Installation
If it's your first time using the USB-based programmer from XELTEK, this chapter
will help you to install the software and connect the programmer hardware properly.
USB devices are PnP devices. At the first installation, Windows will start with "new
hardware wizard" to scan all available INF files, and find out the appropriate drivers
for the newly found hardware. In order to avoid unwanted complication during the
installation of USB device, we strongly suggest that you install the software first. The
setup program will handle the needed INF files and drivers automatically.
2.1 Software Setup
2.1.1 Setup from the CD-ROM
Insert the CD into the CD-ROM drive.
If the setup program starts automatically, a dialog box will show up for you to select
the programmer model. If the setup program does not start automatically, please run
SETUP.EXE in the root directory.
Select the corresponding model of the programmer you have bought. Click Setup to
install the application software for the programmer.
NOTE: Each model has its own software. Please do not mismatch them.