SuperPro
®
6100 Programmer
1296 Kifer Rd. Suite #605
Sunnyvale, CA 94086
Tel: +1 408-530-8080
Fax: +1 408530-0096
Refer to the
“
Project
”
menu for the definition of the project.
4.1.1.4 Exit
This command closes the programmer software and returns you to the control of the
operating system.
4.1.2 Buffer
The menu manages data in the buffer.
4.1.2.1 Edit
The selection brings up Fuse Buffer Edit window if the device buffer type is Fuse;
otherwise, brings up Data Buffer (HEX/ASCII) Edit window. You may edit the buffer
data on the screen with the following keys:
<PageUp> Page up
<PageDown> Page down
<Home> Move cursor to the beginning of the line
<End> Move cursor to the end of the line
An example with two data buffers is given in the following:
Note: Several data buffers can be opened at the same time by using the toolbar.
1. Can switch from one data buffer to another. The current data buffer name is shown
in the highlighted area.