Please read these instructions carefully, and keep them for future reference.
These instructions assume the fixture is being mounted to a concrete wall.
PARTS & TOOLS REQUIRED:
Athena Stairwell Fixture
Wire Nuts
Flat Blade Screwdriver (Not Provided)
WARNING
: Turn power off at circuit breaker or fuse box. Do not
rely on a wall switch alone to turn off power. Failure to do so may
cause a shocking hazard and damage this electronic fixture!
2
Xeleum’s Stairwell Fixture
Drill or Hammer Drill and Masonry Drill Bits
(Not provided) depending on the mounting
surface
Phillips Screwdriver (Not Provided)
Athena Series of LED
Stairwell Fixtures
Installation & Operation Guide
Tamper Resistant Screwdriver (Provided)
Anchors & Mounting Hardware (Not Provided)
Revised: 1/6/14