Binding Receiver and Transmitter
15
In case you want to bind a gasoline powered
model, connect the external power supply with
any socket of the receiver. Connect the power
supply to its designated socket after the binding
process is complete.
2. The transmitter must be switched off.
Press the bind button and switch it on
afterwards. The transmitter is now in the
binding mode.
1. Stick the bind plug in the BIND socket.
Connect the power supply with the
receiver (socket SIG). The control lamp of
the receiver blinks red.
3. As soon as the control lamp of the receiver
glows constantly red, the binding process
is complete.
4. Remove the bind plug and disconnect the
power supply from the receiver.
5. Switch the transmitter off and press the
bind button again. When you switch the
transmitter on next time, it will be in its
normal mode and ready for usage.
www.xelaris.ch
Before the receiver is ready for usage, it must be bound to the transmitter.
Proceed as follows:
