![background image](http://html1.mh-extra.com/html/xebex-fitness/airplus-cycle/airplus-cycle_manual_3231561003.webp)
3
XEBEX AIRPLUS CYCLE
CONSOLE KEYS
Just press START key or start pedaling
to start the console. When time starts
counting, press UNITS key to switch to
km or mi for setting distance and speed
calculation.
1 . Units Keys (Miles / Km)
In standby mode, press the Target key
to light up TIME, DISTANCE, CALORIES,
PULSE in order and select the Target
Program desired.
2. Target Key
In standby mode, press the Interval key to
display TIME, DISTANCE or CALORIES and
select the Interval Program needed.
3 . Interval Key
In standby mode, press the BT/ ANT+ key
once to turn on the BT/ ANT+ display. Press
the BT/ ANT+ key the 2nd time to turn off
the BT/ANT+ display. Repeat the same
steps to ON/OFF the BT/ANT+ display.
4. D. BT/ ANT+ key:
1. In standby mode, press the START key to
enter the QUICK START program setting.
2. After program is selected, press START
key again to begin the workout.
5. START key:
During PROGRAM setting, press the DOWN
key to decrease the setting value.
6. DOWN Key
1. During PROGRAM setting, press the
ENTER/ MODE key to confirm the setting.
2. During the workout, press the ENTER/
MODE key to switch display of CALORIES/
CALORIES HOUR and WATTS/ WATTS
AVG.
7 . Enter/Mode Ke
During PROGRAM setting, press the UP
key to increase the setting value.
8. Up Key
1. During the workout, press the PAUSE/
RESET key to stop the workout.
2. When the workout stops, press and hold
the PAUSE/ RESET key for 3 seconds to
RESET the console and erase all workout
data.
9. Pause / Reset Key