5. System Setting
In the main interface, select the system settings icon, enter the music settings
submenu, use the Switch key to select the settings, press the OK button to
enter.
1) Language Setting
X20 supports multiple languages, such as Simplified Chinese, Traditional
Chinese, English, Japanese, Korean, French, German, Polish, Russian, Thai,
Spanish, Indonesian, press Enter to enter language list, press Switch key to
select the language, press the OK key to confirm the selected language.
2) USB Mode
USB mode has two kinds of "DAC" and "USB" (see USB / S/PDIF in "Keys and
Port Description").
3) Backlight Brightness
Press the OK button will pop up a submenu, you can adjust the backlight
brightness, total of 6 levels adjustable.
4) Screen Time
Select this, press the OK button will pop up a submenu, you can adjust the
screen time, OFF, 10S, 30S,1M, 5M, 10M a total of 6 files adjustable.
5) Folder Jump
When this function is on, the player will continue with the next folder after finishing
the folder that includes the selected song. When it’s off, the player will only play
the folder that includes the selected folder.
6) Car Mode
Select the Car Mode, use the USB cable to connect the 5V power supply from
the vehicle, when it starts, X20 will boot and get into the car mode, when the
vehicle stopped DC 5V power supply, X20 will automatically shut down after
countdown if no operation.
Note: The player cannot be connected to the computer to transfer data during
Car Mode.
7) Power Saving
There are OFF, 5M, 10M, 30M, 1H, 2H total 6 selections, if no operations or
playback, the player will shut down when it reaches the set value.
8) Sleep Timer
Can be set to automatically shut down after a period, set the same way as "
Power Saving."
1) Update Media
There are "Automatic" and "Manual" two options, you can set the player to scan
automatically when SD card is inserted.
2) Gain Setting
There are two options of "G = L and" G = H "for low gain 0dB and high gain 6dB.
When using high-impedance headphones, you can choose high gain to get
more enjoyable sound quality.
3) Digital Filter
There are two kinds of digital filter: Sharp Decay and Slow Decay.
4) DSD gain
When playing DSD music, you can adjust the
gain value. Press OK to pop up the submenu,
0-6dB adjustment (as shown below), use the
Switch button to adjust, press the OK button
to finish.
5) DSD Output Mode
This menu sets the S/PDIF out, USB AUDIO
OUT output mode, can be set to D2P or DoP. When set to D2P mode, DSD
audio will be converted to PCM signal. When set to DoP mode, the DSD audio
will output the native signal.
Note: 1, S/PDIF out supports up to DSD64 native code, PCM192KHz/24Bit
output, any signal is higher will be converted to PCM or down-output.
9) Format
The player can format the inserted SD card(formatted data cannot be restored,
please be careful).
10) Restore the Factory Settings
The player can be reset to factory settings.
11) Firmware Update
Put update pack update.upt into the SD card,
and insert to the player, select System Settings
- Firmware Update, pop-up dialog and select
"YES". Press the OK button to start the update
(update image as the right side), when it’s
done, the player will automatically restart.
12) Player Information
Select and press the OK button to enter the sub-page, including: Serial, External
memory capacity, Available capacity, Bluetooth address, Firmware version etc.
Set the volume limit to play music to prevent excessive volume to hurt hearing
caused by misoperation.
13) Default Volume Mode
There are Default and Memory two modes. Default mode means the player will
power on with the default volume you set. Memory mode means the player will
memorize the volume value and power on with it.
14) Default Volume
Here you can customize the default volume value.
15) Channel Balance
Short press the OK button pop-up channel balance adjustment window,
maximum support ten levels of adjustment for both channel.
16) Lyrics Display
When this function is turned on, the lyrics can be displayed on the playback
page when playing.
17) Cover Display
When this function is turned on, will show album cover when playing, show the
system default cover when this function is off.
10
2, USB AUDIO OUT support up to DSD256 original code, PCM 384KHz/32Bit
output.
6) Equalizer (EQ)
Press OK to enter the EQ menu for EQ adjustment:
Press the Switch key to EQ mode selection,
EQ modes include: Rock, Classic, Jazz, Pop, Dance,
Vocals, Blues, Metal, etc.; Each frequency can be
precisely adjusted under Custom mode:
①
, Press the OK button to enter the Custom mode
②
, Press the switch button to select the frequency
band to be adjusted.
③
, Press the OK button, confirm the selected frequency band, use Switch key
to adjust, after one frequency band adjustment is completed, press the OK key
to confirm this frequency band adjustment is completed.
④
, Repeat the second, third step to adjust other frequency.
7) Play Mode
Play mode: Sequence, Repeat all, Random play, Repeat 1.
8) Output Selection
There are two output methods, Spdif and Line out.
9) Line out Adjustment
When connecting Line out output, the volume of the player can be adjusted after
the switch is turned on. When this switch is off, system default to the maximum
volume and cannot be adjusted.
10) Pointbreak Playback
There are three modes for Pointbreak Playback: Off, Track, and Location; when
selected the Track mode, after restart, the player will be playing the same song
from the beginning,00:00, and it select the Location mode, the player would
memorize the location of the track and start from there.
11) Seamless Playback
Seamless Playback is mainly for the player to automatically switch tracks
smoothly, more user-friendly continuous enjoy high-quality music.
12) Maximum Volume